Apogee-N is a highly accurate Inertial Navigation System with embedded GNSS receiver for real-time and post-processing operations. The ITAR Free Apogee-N is the most accurate INS/GNSS based on the robust and cost-effective MEMS technology.
0.008° Roll & Pitch (RTK)
0.04° GNSS-based Heading (RTK)
1 cm Position (RTK)
Post-processing with Qinertia INS/GNSS PPK Software
5 cm Real-time Heave
2 cm Delayed Heave
The latest MEMS gyroscopes and accelerometers
The latest tri-frequency GNSS receiver with one Survey grade antenna
The Latest Tri-frequency GNSS receiver – RTK, TerraStar, Veripos Positioning
This state-of-the-art INS/GNSS integrates the last generation of Tri-frequency GNSS receiver which supports RTK, TerraStar and Veripos positioning services. It is the smallest and lightest integrated inertial navigation system at this level of performance.
Extensive Heave Calculation
The Apogee provides a real-time heave accurate to 5 cm. For more simplicity, the user doesn’t have to enter the wave frequency; the Apogee automatically detects it and constantly adjusts to it.
Apogee comes also with a unique delayed heave feature with no additional software nor user action. This specific algorithm allows a more extensive calculation, resulting in a heave accurate to 2 cm displayed in real-time with a little delay.
Apogee-N is an all-in-one solution that provides accurate trajectory even in urban canyons, forest, or tunnel. It handles GPS outages thanks to a tight integration of inertial, GNSS, and odometer information. Apogee-N is a smart choice for all advanced Land Mobile Mapping application.
Apogee-N is the ultimate INS for Aerial Mapping, Photogrammetry or Remote Sensing projects. Thanks to its very low noise gyroscopes, it delivers accurate and stable orientation and position data, both real time or post processing. It’s also a cutting edge solution for strategic UAV navigation and advanced payload stabilization.
Complementary Equipment and Software
Connection, Synchronization, and Positioning
The SplitBox provides a simplified interface for easy connection and synchronization with external equipment such as odometer, differential corrections, computers, or survey instruments. The SplitBox with integrated GNSS receiver additionally delivers navigation data with a large choice of positioning services (Marinestar, TerraStar, etc.).
Qinertia INS/GNSS Post-processing Software
Qinertia is the SBG Systems in-house post-processing software. This full-featured software enhances SBG inertial navigation systems performance by post processing inertial data with raw GNSS observables.