VBOX CAN To Analogue Output Module

HomeVBOX CAN To Analogue Output Module

The CAN to analogue output module is designed to convert CAN bus data into voltage and digital output. In this way it is possible to log data from a CAN bus with data logging equipment not incorporating a CAN interface.

Four analogue voltage outputs are available and these can be mapped using the configuration software to output virtually any CAN bus parameter. An example might be throttle position data read from CAN and converted into a 0 to 10v signal.

The module is also equipped with seven digital outputs, of which four can be set as frequency generators.

  • Converts CAN bus data into voltage and digital output
  • Four analogue outputs
  • Seven digital outputs

 

INPUTS

  • CAN
  • RS232

OUTPUTS

  • 4x Analogue
  • 7x Digital

OUTPUT CHANNELS

  • 4 Analogue Channels
  • 7 Digital Channels

OUTPUT SIGNAL RANGE

  • Analogue Voltage: 0 to +10VDC
  • Digital: 0V/+12 VDC

RESOLUTION

  • Analogue Voltage: 12 bit, 2.44 mV per bit
  • Timer Compare: 16 bit

POWER

  • Voltage Accuracy: ±0.1%
  • Power Supply Voltage: +12VDC (± 10%)

CAN

  • Type: CAN 2.0A or CAN2.0B Compatible
  • Baud Rates: 250Kbit/s, 500Kbit/s, 1Mbit/s

DIMENSIONS

  • 125mm x 119mm x 30mm

Download or print datasheet here.

pattern
http://www.zenmicrosystems.co.in/wp-content/themes/blake/
http://www.zenmicrosystems.co.in//
#ef3e35
style3
paged
Loading posts...
/home/zenmicrosystemsc/public_html/
#
on
none
loading
#
Sort Gallery
http://www.zenmicrosystems.co.in/wp-content/themes/blake
on
yes
yes
off
ENTER YOUR EMAIL HERE!
off
off