VBOX Vehicle CAN Interface

HomeVBOX Vehicle CAN Interface

The VBOX Vehicle CAN Interface is a CAN gateway which translates from one CAN Bus into another. The unit is designed to recognise 16 different variables being transmitted on a CAN bus, and then re-transmits them in a form that the VBOX can log along with the normal VBOX channels.

The CAN Interface can be programmed to read almost any format in a CAN message, and then assign a name, multiplier, and offset. This information is then re-transmitted onto the VBOX CAN bus and is recorded at 20Hz to the compact flash card.

Transfer of VBOX data to the vehicle bus is blocked to prevent unnecessary Bus loading.

Racelogic can also supply CAN sets for a number of manufacturers, allowing various parameters to be logged.

  • 125Kbit, 250Kbit, 500Kbit and 1Mbit CAN rates
  • Up to 16 separate CAN parameters
  • Scale & offset data to record real values
  • Blocks VBOX data from vehicle CAN bus
  • Optional vehicle data sets available on request
  • Input Channels: 16 x CAN data channels from vehicle or other CAN bus
  • Input Data Type: From 1 bit to 32 bit; Intel/Motorola format; signed/unsigned; selectable start bit
  • Output Channels: 16 x CAN data to VBOX
  • Output Data Type: User configurable, scaling and offset adjustable to provide real values
  • Power Supply Voltage: +9 to +18 VDC
  • CAN Type: CAN 2.0A or CAN 2.0B compatible
  • Baud Rates: 125Kbits/s, 250Kbit/s, 500Kbit/s, 1Mbit/s
  • CAN Termination resistor on vehicle bus side: Not fitted
  • Configuration: Via VBOX/VBOX Tools or Standalone Module Setup Software
  • Dimensions: 128mm x 119mm x 30mm

Download or print datasheet here.

pattern
http://www.zenmicrosystems.co.in/wp-content/themes/blake/
http://www.zenmicrosystems.co.in//
#ef3e35
style3
paged
Loading posts...
/home/zenmicrosystemsc/public_html/
#
on
none
loading
#
Sort Gallery
http://www.zenmicrosystems.co.in/wp-content/themes/blake
on
yes
yes
off
ENTER YOUR EMAIL HERE!
off
off